概述/GENERAL INFORMATION

NASYN X-46是粘度等級為ISO 46 壓縮機潤滑油，由聚α-烯烴(PAO)全成合基礎油并采用特殊設計的添加劑體系調和而成。

NASYN X-46 is an ISO 46 compressor lubricant formulated from PAO synthetic base fluid utilizing synthetic hydrocarbon (PAO) with specially developed additive systems.

適用范圍/APPLICATIONS

l         采用油浴潤滑的旋轉螺桿式空壓機

l         Oil flooded rotary screw compressors

l         采用油浴潤滑的旋轉葉片式空壓機

l         Oil flooded rotary vane compressors

l         NASYN X-46也可用于需使用抗氧化潤滑油的設備

l         NASYN X-46 may also be considered for other applications requiring an oxidation resistant lubricant

正常工作溫度范圍是 -30℃～205℃（-20°F～400°F）

Normal operating Range is -30°C to 205°C (-20°F to 400°F).

特性/CHARACTERISTICS

l         換油次數少

l         Few oil changes

l         與壓縮機密封、墊圈、軟管及空氣系統組件相容

l         Compatible with compressor seals, gaskets, hoses, and air system components

l         減少漆膜和沉淀

l         Reduced varnish lacquering and deposits

l         火災及爆炸大量減少

l         Greatly reduced fire and explosion hazard

l         減少壓縮機的維護

l         Reduced compressor maintenance

l         油耗降低

l         Lower oil consumption

典型參數/TYPICAL PROPERTIES:

相容性/COMPATIBILITY

在與油漆、密封件，墊圈和軟管的相容性上，NASYN合成烴類潤滑油與礦物油相似。將礦物潤滑油改為NASYN合成烴類潤滑油時，對于相容性不需要特別的預防措施。

NASYN synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when changing over from a mineral oil lubricant to an NASYN synthetic hydrocarbon based lubricant.

公司信息